Can I connect 2 phase 120VAC to a power supply rated for 240VAC input? - All About MEAN WELL Power Supplies

If the two phases are 180o out of phase (split phase system), then yes. The resulting voltage will be around 240VAC, so it can be used with power supplies that has input range of 200VAC-240VAC.If the two phases are 120o out of phase, the resulting RMS voltage will be 208VAC, so it should work, but derating might be needed on some models. For a single-phase operation, you should check the input range of the power supply in its datasheet (derating might be necessary at low input voltage).

Mean Well Class 2 Constant Voltage LED Driver 12V 850mA 10W IRM-10-12

Mean Well HDR-30-12

DR-120-48 Power Supply 1 Phase in, output 48 volts DC 2.5 Amps

EKM-Omnimeter II UL v.3 – Universal Smart Meter, Single Phase or 3

Resources - All About MEAN WELL Power Supplies

24Vac DIN Mount Power Supplies, 120-480Vac to 24Vac

INPUT POWER: 90 ~ 135V ac , CASING: Fully isolated plastic case IP42 (with PFC) , OUTPUT: 350mA to 1400mA , WATTS: 16W & 25W , CONNECTIONS: UL Rated

PCD Series MEAN WELL 16~25W CC LED Drivers with Triac dimming

120/240V Split Phase (US/Can) - The Engineering Mindset

SunGold Power 4000W DC 24V Split Phase Pure Sine Wave Inverter

Ac input active surge current limiting, high efficiency up to 90 percent and built-in active pfc function,pf>0.95 Protections: short circuit /

Mean Well RSP-2400-24 AC to DC Power Supply, Single Output, 24 Volt, 100 Amp, 2.4K Watt, 10.9 L x 7 W x 2.5 H

Industrial Power Supplies: Meanwell, Sola, Moxa, Phoenix Contact

How to Connect an AC/DC Power Supply with 120Vac Input #MEANWELL

Rated power: 600W. 24V DC 25A output. AC input active surge current limiting. AC input range selected by switch. Forced air cooling by built-in DC

Mean Well SE-600-24 AC to DC Power Supply Single Output 600W 24 Volt 25A

Know the Difference Between Three-Phase and Single-Phase Power