Why won't my Honda CBX750 run properly?

Q. I’ve just got an ’86-reg Honda CBX750, it had blowing header pipes which I’ve fixed. My problem is that when I try to ride it after letting it warm up the middle two cylinders splutter then cut out. I give it two minutes and it starts up fine, but won’t take any load. Dave Wood, Bournemouth A. Unfortunately it sounds like you may have bought a bit of a pig in a poke. The bike is now 25 years old, so things do start to go wrong, it’s inevitable. Are you sure it’s the two middle cylinders and not one? If you decide to keep the bike, then check the coil for cylinders two and three as well as the HT leads and plug caps. If the problem isn’t there, then check the twin pulse pick-ups as they used to be one of the fewfaults this bike had back in its day. Also check the plug connector from the main loom to the coils (check for corrosion and continuity), as it is a separate piece of loom. Drain the carb float bowls into a clean bowl to see if there is any water or debris in there too. If

1983 Honda Cx500 C V Twin

Nighthawk 450 Brat Bike

Is my 1970s Honda CB400F the only Japanese motorcycle to have been built with a 4-1 exhaust system as standard? - Quora

CBX750 VS CB750 Seven Fifty. Engines comparing. Part1. Crankcases. – Gazzz Garage

Custom Honda CBX 750 Motorcycle Print Watercolor Motorcycle

1982 Honda Cbx1000 Inline Six Pro Link

First rebuild. '81 Honda cb750c. Started breaking it down in November. Here's where I'm at now… : r/CafeRacers

Here's one that stands out, a Honda CBX750 built by @fngworks with bodywork inspired by the cyberpunk vibe and aesthetic. Nice job creating…

The bike im considering VS my current bike. Talk me out of it : r/motorcycles

The perfect 100 point Restoration of the Legendary Honda CBX

1980 Honda CBX1000-A

Vespa Velutina: Honda Hornet 600 Café Racer – BikeBound

g058ng1olsc magzus.org by Thomas Swift - Issuu